Audemat-Aztec Audemat-Aztec
NEXT FM

What is processing delay of the Digiplexer 2/4 ?
The processing delay for each output is given into the menu SETUP / SOUND PROCESSING.
This delay is non audible: even into the 4-band version, it is typically under 6ms.
Can factory presets be modified and overwritten causing lost of preset?
No. You will never lose any preset:
  • Factory presets are always available from the menu NEW PRESET
  • You can also Export your preset as a file and save it on your PC by clicking on Preset / Export.
How to set the input levels ?
From the menu SETUP / INPUT / INPUT LEVEL, you can adjust the input level for each audio source. For example, if your maximum analog peak level is 12dBu, you must configure the Analog Reference level at 12dBu. As a result the AGC IN vumeter will show audio peaks at 0dBfs.
Even in case of Silence, the backup doesn’t start.
Double check the parameters configured into the menu SETUP / INPUT:
  • The “mode” must be configured to BACKUP
  • The threshold is may be to low. We recommend to set this parameter to -45dB for a good silence detection.
  • Don’t forget to also configure the needed time to wake up and to fall asleep. You can also add a fade in and fade out for better results.