
| Hardware description |
|
| Size |
|
| Weight |
|
| Environmental conditions | |
| Indoor part | |
| Temperature |
Normal operation : 5 – 45°C / Maximum : 0 – 50°C |
| Relative humidity | 90 % |
| Incoming cooling air | Clean and dry |
| Outdoor part | |
| Temperature | Normal operation : 5 – 45°C / Maximum : 0 – 50°C |
| Relative humidity | 95 % |
| Incoming cooling air | Protected frm the weather |
| RF Parameter |
|
Frequency range
|
|
| Modulation |
Mode I, II, III et IV |
| Input format |
|
| Bit rate | 2 048 Kbits/s ±50ppm |
Max delay for
|
|
Output level
|
|
| I/Q amplitude unbalanced | < 0.05% |
| I/Q quadrate error |
< 0.05 |
OUTPUT (without filter)
|
|
| Clock and synchronization | |
| 10 MHz reference output |
0 dBm ± 3 dB |
External 10 MHz reference input :
|
|
External 1 pps reference input :
|
|
| SFN Synchronization accuracy | ± 200 ns |
| General specifications | |
| VHF nominal output power |
150W, 300W, 600W, 1.2kW, 2.4kW |
| UHF nominal output power | 100W, 200W, 400W, 800W |
| Frequency range | 174 – 240 MHz Bande III 1452 – 1492 MHz Bande L |
| Output impedance | 50Ω |
| Output connector | N, 7/8 EIA |
| Bandwith | 1,536 Mhz |
| Efficiency | > 35% |
| Frequency stability | 1x 10-07 / an |
| Spurious | > 75dB |
| Electrical power | Single phase : 88 – 264VAC / 47 – 63 Hz Three phases : 310 – 450VAC / 47 – 63 Hz |
| Type of power line |
Single phase : 3 cable (Ph, neutral, ground) Three phases : 5 cable (Ph1, Ph2, Ph3, neutral, ground) |
| Power factor |
> 0,90 |


